Download the files
Four downloads: the video, the sleeve, the cassette labels, and the blank template the sleeve was built on. Everything is at print resolution.

Kickassia, 4:3 cut
The full movie reframed shot by shot for a 4:3 screen, so nothing important sits outside the frame on a CRT. About 2.7 GB.
Stream it or download it from the item page: archive.org/details/kickassia-vhs

Sleeve artwork
Front, spines and back as one flat wrap. JPEG, 3611 x 3122 px at 300 dpi, sized to the duplication.com VHS sleeve template with bleed.

Cassette label sheet
Ten labels to a page. JPEG, 2550 x 3450 px at 300 dpi, letter width with bleed top and bottom.

Blank sleeve template
The duplication.com VHS sleeve template with trim, bleed and safe-type guides, in case you want to lay out your own sleeve.
The sleeve and label files are RGB JPEGs. A print shop will want CMYK, so convert them and export a PDF/X-1a before you send anything out.
Make the tape
Two ways to do this. Record it yourself onto a blank, or send the file out and have a duplicator do the run.
-
Get blank tapes
T-120s are the right stock for this. Kickassia runs 91 minutes, which fits on a T-120 at SP speed with room to spare, and SP is the only speed worth using if you care how it looks.
-
Record it yourself
Play the 4:3 cut out of a computer or a media player into a VCR and record in real time. Any capture box or DVD player with composite out will do the job. Watch the first minute back before you commit the whole run, and knock the tape's record tab out when you are happy with it.
-
Or send it to a duplicator
The original tapes were made by duplication.com (Analogue Media Technologies, in Canada). No special instructions went with the order beyond their standard print specs. Their VHS product with printed cardboard sleeves has a minimum order of ten units, and their posted price ladder on 09/07/2026 ran from USD$96.75 at the 1 to 4 piece tier down to USD$7.84 at 3000 or more, with a USD$57.00 setup fee. Small runs are expensive per tape. Ten friends makes it reasonable.
-
Give the printer clean files
Their requirements are on the VHS templates page: print-ready PDF/X-1a with no transparency, 300 ppi, CMYK, 1/8 inch bleed, and 1/8 inch of safety margin between the trim edge and anything you care about. If you build off their template, send two PDFs, one with the template lines and one without. They also ask that packaging artwork carry "Made in Canada" on the outside so the shipment clears the border.
The sleeve art here already sits on their template, so it is sized correctly for that order. If you go to a different printer, check their template first, because the wrap dimensions and flap depth vary.
Print the sleeve
You do not need a duplicator to end up with something on your shelf. Both print files work at a local shop, or at home if you have the paper for it.
Sleeve
| Flat size | 12.04 x 10.41 inches, bleed included |
|---|---|
| Resolution | 3611 x 3122 px, 300 dpi |
| Stock used on the original | 18pt board, digital or offset press |
| At home | Needs 13 x 19 inch paper, so this is usually a print shop job |
Score the folds at the template lines, wrap it around a plain black sleeve or slide it into a clear O-card sleeve, and you have the shelf presence without the minimum order.
Cassette labels
| Sheet size | 8.5 x 11.5 inches, letter width with bleed |
|---|---|
| Resolution | 2550 x 3450 px, 300 dpi |
| Labels per sheet | 10, in two columns |
| Stock | Full-sheet adhesive label paper, then trim |
Print at 100 percent with no scaling, or the labels will not line up on the cassette. Trim to the label edge and burnish it down from the center out.
What is on the label
How the tape happened
In 2025, Red Cow Arcade reviewed Kickassia and joked about how it would be best suited for VHS. Levi (Cap) took the joke seriously enough to make one, and messaged Doug Walker to ask permission. Doug came back enthusiastic and gave his blessing.
Jason Graves reformatted the movie for 4:3, working through every cut by hand. Chris Leroux rebuilt the sleeve from scratch off 480p promo videos, because that was the only reference available, and designed the cassette labels as a nod to the tape labels of the 1990s. Levi handled the authoring and shipped to several friends from the Red Cow Entertainment community.
Doug got one of the tapes and posted it. The day after that, Channel Awesome announced the Kickassia DVD was back in print, with used copies having reached absurd prices on eBay. It is in print now at the Channel Awesome shop.
Credits
The tape
- Original VHS authoring
- Levi Reid (Cap)@YourCaptainSpeaking-MK-1 on YouTube
- 4:3 reformatting
- Jason Graves@JasonGravesPoser on YouTube
- Sleeve adapted and designed
- Chris Leroux@ChrisLeroux on X
- Website
- Frankie Frain
The movie
- Written and directed by
- Doug Walker
- Produced by
- Michael Ellis, Michael Michaud, Doug Walker and Rob Walker
- Music by
- Michael Schiciano
- Original film
- Channel Awesome, 2010
Red Cow Arcade
- Hosts
- Frankie Frain and EJ Massa
The marks on the label, redrawn by Chris Leroux for the tape.
Buy the official release
Kickassia is in print on DVD at the Channel Awesome shop. If you want the movie on a disc that somebody was actually paid for, that is where to get it.